continuing the place mat process

After spending the better part of an afternoon prepping the raw materials for more place mat sets, I've got about 2 afternoons under my belt at my sewing machine piecing them together (and still one more set to go, plus bindings on all). I do like that Quilt-as-you-Go method, though!

I've decided to upload some process photos, and leave the explanations to a minimum. If you're curious about my QAYG technique, I did a detailed post/tutorial back in February, which you can find here. The sets I am working on currently follow the same basic method, and only differ in combination and placement of fabrics (oh, and in overall number).
(I've already got a larger strip on the "back" side of the batting piece, waiting to be stitched down

pinned in place

front to back

chain stitching a QAYG

the first row on all 8 mats in the set

pressing open

Getting a glimpse of both sides, and see where the joining stitch on one side provides a quilting line on the opposite side. And now my raw edges are lined up, ready to add strips to both sides simultaneously for the next step.


placing a strip face down on each side of the mat, to be stitched down simultaneously.

And so on, and so forth.



Some pics of the *mostly* finished products... bindings yet to come.

Working with formulas

I'm trying to ramp up my actual production of "stuff," especially after having gone to Portland's Crafty Wonderland fair at the Oregon Convention Center last weekend. It was a great gathering of crafts, and for the most part a good balance of items (though a bit heavy on the jewelry and screen/press printing, but that can't be bad). So, between that excursion and an exchange of emails with my dear friend from BaseNatural (homemade soaps, lip balm, etc.), I've been able to see goals a little more tangibly.

So, I worked out a new formula for more Quilt-as-you-go place mats...


... and started gathering fabrics...



... and cutting strips.



And more strips, for more sets.




And then I cut the batting...





... with the left-overs being the perfect size for future pot holders!

QAYG reversible placemat tutorial


I am not sure when I first began making these placemats, but I seem to have found a general layout that appeals to me and comes together rather quickly and effectively with all sorts of different fabric choices. Thought I might share one of the methods I use to make a fun set of Quilt-as-you-go reversible mats.

Total yardage requirements are for a set of 6 placemats, each approx. 13" x 18" finished.

Yardage requirements:
*A - 1/4 (3/8)
B - 1/3 (3/8)
C - 1/4 (3/8)
*D - 1/2 (3/4)
E - 3/4
F - 3/8
Binding - 2/3 yd
* if you use the same fabric for A & D, you will need 3/4 yd total
(yardages in parentheses are for directional fabrics)
You will also need 6 pieces of batting, approximately 14” x 19”, preferably with no polyester content, as you will be ironing over the batting as well.
Thread to match (or artfully contrast) your fabrics.

We'll start by getting all of your fabric pieces cut first. This is generally pretty straight forward, but be aware of any directional fabrics and be sure it is running the direction you would like in that position and where applicable, adjust the cutting instructions to make the 13 1/2” strip first and then subcut by the appropriate widths for that piece.

**Fabric A: Cut 2 strips 4 1/2” x WOF
sub-cut at 13 1/2” for a total of 6 rectangles 4 1/2” x 13 1/2”
Fabric B: Cut 4 strips 2 1/2” x WOF
sub-cut at 13 1/2” for a total of 12 rectangles 2 1/2” x 13 1/2”
Fabric C: Cut 2 strips 2 1/2” x WOF
sub-cut at 13 1/2” for a total of 6 rectangles 2 1/2” x 13 1/2”
**Fabric D: Cut 2 strips 8 1/2” x WOF
sub cut at 13 1/2” for a total of 6 rectangles 8 1/2” x 13 1/2”
Fabric E: Cut 2 strips 13 1/2” x WOF
from each strip cut (3) 4 1/2” x 13 1/2” rectangles and (3) 8 1/2” x 13 1/2” rectangles
Fabric F: From the 3/8 yd, cut 6 rectangles 6 1/2” x 13 1/2”
** In this set I've pictured, I DID choose to use the same fabric for A and D, so instead I cut (2) strips at 13 1/2" and from each strip sub-cut (3) 4 1/2" and (3) 8 1/2" for a total of 6 rectangles of each size.

Start with one of the pieces of batting, take a rectangle A and one of the 4 1/2” wide rectangles E. Layer them on either side of the batting, front of fabric facing out and lining up the edges as best you can.


Have the batting so that fabric E is showing. Take a rectangle F and place it face down, lining up the raw edges on the right side. Pin in place.


Next, turn over the batting, and place a rectangle B face down on A, again lining up the raw edges on the right. Reset your pins to go through all layers.


Carefully stitch with your walking foot, 1/4” from the matching raw edges of the fabrics on top. At this point it is good to check to see if your seam allowance on the back side is approximately 1/4”. Don’t worry if it’s a little bit off, that’s to be expected, just be sure there isn’t too much of a difference.
Take out the pins and press each side open. Try to get your rectangle F to lie flat against the batting, then flip over to work on the other side.


Next, take a rectangle C and place it face down on B, again lining up the right-hand raw edges. Pin in place. Stitch as before, take out pins and press open. Repeat with another rectangle B.


You will notice that on the "back" side of your mat (piece F) the seams from the piecing you have been doing are coming through as quilting stitches, securing the batting and fabrics thus far...


At this point the raw edges of your second strip B and of fabric F on the opposite side should line up. Take a rectangle D and place it face down on the same side you’ve been working from. Pin in place, then turn your project over and place an 8 1/2” wide rectangle E face down over F. Reset pins to go through all layers, stitch and press open.



Voila! I do recommend adding a little more quilting in some of the larger sections without stitching. I will often add just a couple more lines across, either parallel to or perpendicular to the stitching already in place, but you are certainly free to quilt however you like (be it meandering, pictorial, zigzags, echo, etc.)

Repeat for all 6 mats. Square up mats to approx. 13 1/2” x 18 1/2” and bind as you would a small quilt.